Archive for the ‘Uncategorized’ category

How to Make Divan Beds look good in your home

Learn how to build your own divan beds for your home.

The concept behind divan beds is simple. Divan beds are meant to be a box couch during daytime and by simply putting a mattress on top, it becomes a bed for sleeping at night.

You can build your own divan beds. Here are some basic pointers for learning how to make divan beds.

Design Considerations

Modern divan beds come in two configurations. One has a platform top – a flat surface layered in foam and cushions. The other has a sprung edge base box. Here the top is lined with springs that provide added comfort and support to the mattress.

We will use standard UK bed sizes for this project. This is to enable you to easily use commercially available mattresses for your divan beds.

Another point to consider with divan beds is the option to add storage space. This entails additional construction of drawers. For now however, we will focus on building simple platform top divan beds sans storage.

Materials and Equipment

2×2” and 2×6” lumber (for the box base)

conventional foam

bed fabric and tacks

contact cement

wood glue

3 inch nails

castor rollers with screws

measuring tape

screwdriver

saw

hammer

Procedures

Measurements – The box base should be measured according to a standard single sized mattress; about 90 cm (3’) wide and 200 cm (6’ 6”) long. Alternatively, purchase the mattress beforehand then cut your lumber according to its size. The height of the divan is usually about 40 centimetres from the floor.

For one divan box base you will then need two pieces 2×6 equal to the length of the mattress, 14 pieces width-long 2×6 (twelve of these will serve as horisontal slats for the platform top), four pieces 2×2 at 40 centimetres long for the corner legs, two pieces 2×2 also at width and two more 2×2 equal to the length of the mattress.

Construct the box base – Using wood glue, attach the width-long 2x6s to the top end of the 2×2 legs then nail them in place. Then attach the lengthwise 2x6s similarly to form the top rectangular frame. Reinforce this with the remaining 2x2s to be attached accordingly along the bottom part of the box base. Then glue and nail the horisontal slats along the top of the box base making sure to distribute them evenly and aligning them neatly along the side edges. Finally, with adhesives, attach onto the top slats two to three layers of conventional foam that are cut to the dimensions of the frame.

Finish in bed fabric – Using contact cement and tacks, cover the box base in a bed fabric of your choice. Finally, screw on the castor rollers to the four corner legs.

You will need to construct two to four divans in the manner described above. By placing your desired top mattress you have effectively constructed your own divan beds. Store the mattress elsewhere and your divans become extra lounge couches during the day. There then is a neat and convenient project for making simple divan beds.

Making Green Computing Changes in Big and Small Ways

Green computing is a rising trend that looks to establish itself as the preferred IT philosophy — not because techies are tree-huggers, but because green solutions are affecting their bottom lines. Many businesses today are asking the questions: “What is green computing?” and “Why is green computing so important to society?”

What is Green Computing?

Today, the term green computing embodies the entire life cycle of technologies, including research, manufacturing, use, and disposal. Green IT takes a much more holistic approach than it once did, especially as companies are brainstorming solutions to cut costs and increase revenue.

Why is Green Computing Important?

Green computing benefits the environment. Reduced energy usage from green computing techniques translates into lower carbon dioxide emissions, stemming from a reduction in the fossil fuel used in power plants and transportation. Conserving resources means less energy is required to produce, use, and dispose of products. Put simply, saving energy and resources saves money.

The advantages to green computing are realized on both large and small scales. Green technologies are available for an entire organization or for a single employee’s workstation. Unfortunately, many companies and business owners are stalled by the initially larger investment in green technology, and fail to realize the long-term benefits and cost savings. As such, let’s examine adjustments that can be made regarding green computing and IT support, big or small.

System-Wide Green Computing

When investigating green alternatives for your entire organization, consider technologies like cloud computing. Basically, cloud computing eliminates the need for hardware like servers. Also known as virtualization, cloud computing replaces hardware with “virtual” servers or servers in “the cloud.” Essentially, cloud computing allows companies to reduce their need for big, bulky, energy-consuming servers by relocating them on the Internet. Cloud computing may also be used in areas like networking, data storage, software applications, and operating systems, again, potentially reducing the need for hardware. As a result, businesses stand to save a lot of time, money, and resources on maintenance and support by switching to cloud computing set-ups.

Individual Green Computing

There are many other green computing techniques at the personal computer level. For instance, power management can be an easy and effective means of saving green while conserving energy. While many operating systems come with power-saving settings, there are also a variety of products that monitor and adjust energy levels to increase performance and reduce wasted energy. For instance, some surge protectors can sense when a master component (like a computer) is turned off, and respond by cutting off power to any peripheral machines, such as like printers and scanners.

System-Wide and Individual Green Computing

Finally, green computing initiatives can reap savings in both big and small ways. Technologies that save paper, like email, can have a huge impact on costs as well as the environment. As companies and employees develop methods and habits of conservation, simple practices like emailing memos or printing in smaller fonts can bring instant results. Additionally, policies like telecommuting or teleconferences pose additional benefits by reducing the amount of carbon dioxide produced by travel.

Green computing is quickly emerging as the most effective means of utilizing technology. No matter whether your organization’s needs are big or small, green IT can reduce costs, increase productivity, and even do something good for the environment.

Principles of Green Home Designs

Green home designing can allow homeowners to participate in caring for the environment. The negative effect of modernizing can be reduced with the help of green home designs. A lot of people nowadays opt for environment friendly things to ensure that they participate in caring for the Mother Nature. The following are considerations that many architects consider when they design a home that is 100% eco-friendly.

1. Site- when you talk about the site where the home would be built, there are lots of considerations that should be taken into account such as the soil, access, bodies of water, ledge, slope as well as the vegetation around to decrease the impact of creating home to the natural environment of the site. Remember that anywhere you build your home, there will always be a vegetation or life surrounding that area, and architect should be very careful building houses to protect the flora and fauna around the place. The location of the site is very important. It should be well inspected if it is near any farmland, protected species, and wetland. When it comes to accessibility of the house, the location should be near to schools, market, public transportation, and parks.

2. Size- if you desire to have a home that is eco-friendly, then you have to limit the square footage of your home to a minimum. This will reduce the amount of energy that you need to consume to be able for your home to be an ideal place to live. A nice home should have efficient lightning, heat and air-conditioning system, appliances and other gadgets and materials that will consume electricity or energy. The smaller the home, the lesser energy it needs to consume to be able to operate the entire home.

3. Solar- green home designs should not forget the use of solar energy. Whether you choose to have solar energy system inside your home to produce electricity around the house, there are diverse solar considerations when it comes to in green home designs. It is imperative to design the home in a way that it is passive for the use of solar system as lightning strategy of the entire home, natural ventilation, heating and cooling of your home and for all kitchen appliances.

4. Energy- as said earlier, the lightning, cooling as well as heating system are very important considerations when it comes to green home designs. There is a lot of renewable energy that you can use to be able to produce energy or electricity around the house such as wind, solar as well as geothermal energy. With the use of Earth’s natural elements, this can produce energy around your home.

5. Water conservation- there is a lot of ways in how a home can participate in conserving water. By observing low-flow fixture, installing aerators, installing low-flow shower head nozzles and low-flow water fixtures will make your home as effective in conserving water.

It is imperative that new home minimize its use of fossil fuel. Being an eco-friendly home will result in a beautiful and healthy home for the whole family.